32
GB
HT-XT3
4-558-561-13(1)
D:\NORM'S JOB\SONY HA\SO150002\HT-XT3 (PMRF 02)\4558561131_GB
(CEK)\060OTH.fm
masterpage: Left
You can change the settings of the
system (such as change an input or
sound field) by using the remote control
of your TV.
Your TV must be connected to Internet to
use the Home Theatre Control function.
The Home Theatre Control function is a
Sony proprietary function. This function
cannot operate with non-Sony devices.
Language Follow
When you change the language for the
on-screen display of the TV, the
system’s on-screen display language is
also changed.
Use a High Speed HDMI cable. If you
use a Standard HDMI cable, 1080p,
Deep Colour, 3D, and 4K content may
not be displayed properly.
Use an HDMI-authorized cable. Use a
Sony High Speed HDMI cable with the
Cable Type Logo.
We do not recommend using an
HDMI-DVI conversion cable.
Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI
jack may be suppressed by the
connected device.
Sound may be interrupted when the
sampling frequency or the number of
channels of audio output signals from
the playback device is switched.
When [TV] input is selected, video
signals via one of the HDMI IN 1/2/3
jacks selected last time are output
from the HDMI OUT (ARC) jack.
This system supports Deep Colour,
“x.v.Colour”, 3D, and 4K transmission.
To enjoy 3D content, connect a
3D-compatible TV and video device
(Blu-ray Disc™ player, “PlayStation®4”,
etc.) to the system using High Speed
HDMI cables, put on 3D glasses, and
then play back a 3D-compatible
Blu-ray Disc™, etc.
To enjoy 4K content, the TV and
players that are connected to the
system must be compatible with 4K
content.
Enjoying multiplex
broadcast sound (Dual
Mono)
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
To receive a Dolby Digital signal, you need
to connect a TV or other devices to the TV
(DIGITAL IN) jack with a optical digital
cable.
If your TV’s HDMI IN jack is compatible with
the Audio Return Channel function
(page 26), you can receive a Dolby Digital
signal via an HDMI cable.
Press AUDIO repeatedly until the
signal you want appears in the front
panel display.
“MAIN”: Sound of the main language
will be output.
“SUB”: Sound of the sub language will
be output.
“MN/SB”: Mixed sound of both the
main and sub languages will be
output.
Note
Notes on HDMI connections
Note
To Next Page
Loading...
