Sony ICF-2001D - Sleep Timer Operation; Sleep Timer Setup and Usage; Sleep Timer Error Indications

To scan stations of some keys only
1 Press the MEMORY PRESET key to which the station you want to
skip is memorized.
2 Keeping the SKIP key pressed, press the same MEMORY
PRESET key again so the VW mark appears.
To scan stations of a certain band (FM, AM or AIR*) only
Example: To scan FM Stations only
Keeping the SKIP key pressed, press the AM band select key (and
the AIR band select key for certain models) once or twice so that
the 7 mark appears on the upper left of the band indication.
Skip mark
w 12422,
new oni SCANZ
SKIP
lng
* The AIR band is not provided with certain models.
To check the keys to be skipped while receiving a station
Keeping the SKIP pressed, press the MEMORY PRESET keys from
the a-1 key to the d-8 key in turn and check the W mark. By releasing
the keys, the previous station is received.
To erase the 7 mark
1 Press the MEMORY PRESET key for which you want to erase the
Ve mark.
2 Keeping the SKIP key pressed, press the same MEMORY
PRESET key again. The V mark will be erased.
Notes
e@The 7 mark with the band indication has priority over that of a
MEMORY PRESET key. So, when the ¥ mark is set with the band in-
dication, the key is skipped even if the 7 mark of the key itself has
been erased.
@The SHIFT key and SKIP key do not function during memory
scanning.
Error indication
Error d
When all the MEMORY PRESET keys are skipped during memory
scanning, this indication will appear for approx. 5 seconds and
will then disappear. ™ Erase the 7 mark of the required keys.
See ‘To erase the F mark”.
ICF-2001D/2010
SLEEP TIMER OPERATION
—To turn off the receiver automatically
The
receiver
can
be
turned
off
automatically
after
15,
30
or
60
minutes
by
the
sleep
timer.
1 Set the MAIN POWER switch to ON.
2 Set the POWER switch to OFF (or TIMER).
3 Select the sleep timer operation time by pressing the SLEEP key.
With each push of the key, the digits of the operation time
changes from 60 to 30 to 15 (minutes), then the receiver is turned
off. With another push, 60 will appear again.
SLEEP is displayed
during sleep timer
operation.
_-$
weer ®
immer Eo
pu FLU ae
ep
aN
Sleep timer operation time
SLEEP
4 Tune in the desired station.
The remaining operation time is displayed as the time elapses.
The receiver will be turned off automatically after the preset time.
To turn off the receiver before the preset time
Press the SLEEP key repeatedly so that no digits of the operation
time are displayed. Or, set the POWER switch ON, and then reset to
OFF.
To cancel the sleep timer and continue listening
Set the POWER switch to ON.
Error indication
If you press the SLEEP key when there is no radio power source,
this indication will appear for approx. 5 seconds and will then
disappear. ™ Check the following.
@The MAIN POWER switch is set to OFF.
@The radio batteries are exhausted.
@The ac power adaptor or the car battery cord is connected to
the DC IN 4.5 V jack when battery operation is attempted.
+ @The ac power adaptor or the car battery cord is not connected
correctly to a wail outlet or a cigarrette lighter socket of a car.
When the power is supplied, the receiver is turned on and will be
turned off automatically after the displayed time has elapsed.