39
GB
Additional information
Symptom
The radio does
not turn on at the
standby time.
Cannot perform
memory scan.
Auto scan will
not stop.
Cause and remedies
You forgot to press STANDBY MEMORY
or .
c Press STANDBY MEMORY
or (page 29).
The HOLD function is activated.
c Slide HOLD switch in the direction opposite the
arrow (to disappear ā-ā) (page 32).
You took more than 60 seconds to replace the batteries.
c Set the correct time.
The volume is turned down completely.
c Adjust the volume.
No frequencies are stored in the STANDBY
MEMORY.
c Store a frequency in the STANDBY MEMORY
(page 28).
There are not station presets in the page to scan, or
there is only one preset.
c Preset 2 or more stations in the page to scan.
ATT switch is set to ON.
c Set ATT switch to OFF, or adjust the ATT control.
Troubleshooting
To Next Page
Loading...
