Sony IPELA PCS-XG55S Quick Connection Guide

Main indicators that appear during
communication
Controlling a remote camera
Local microphone is turned off.
Presentation (transmission) is being
executed.
Presentation (reception) is being
executed.
Local party has a drawing right of
annotation.
For details on operations, refer to the Operating Instructions
(stored in the supplied CD-ROM).
HD Visual Communication System PCS-XG80/XG80S/XG55/XG55S
Quick Connection Guide Using Direct Dial
 Is the IP address of
the local system* or
the ISDN line number
displayed?
 Is the picture of your
camera (local picture)
on the monitor
screen?
Note: Connection to a remote
party is not possible if neither
the IP address * nor ISDN line
number is not displayed.
* You can hide the IP address of
the local system using the setup
menu.
Turn on your HD Visual Communication System and TV monitor, and check the following to ensure that
connection is possible.
After checking...
4-179-435-11 (1)©2010 Sony Corporation
1
Select the Line I/F and
press ENTER.*
Select the Line
I/F to use.
2
Select the number text
box and press ENTER.
3
Select “Dial” and press
ENTER.
The system establishes
communication.
Number text box Dial
/// (arrow)
buttons and
ENTER button
CONNECT button
BACK SPACE
button
Buttons used for
number input
DOT button
Press.
Line I/F
Or, press .
Enter the IP
address or
ISDN line
number of a
remote party.
Let’s connect
To begin with
* The Line I/F cannot be selected
depending on the system setup.

Sony IPELA PCS-XG55S Specifications

General

Video Codec	H.264, H.263
Frame Rate	30 fps
Network Interface	10/100/1000 Base-T
Embedded MCU	Yes
Video Resolution	1920 x 1080
Audio Codec	G.711
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	XLR, 3.5mm
Audio Outputs	XLR, 3.5mm
Data Ports	RS-232C
USB Ports	USB 2.0 x 2
Camera	Not included
Microphone	Not included
Operating Temperature	0°C to 40°C (32°F to 104°F)