- 18 -
WAX3F
RM-ED009
3-4-3. White Balance of Colour Temperature “Neutral”, “Warm 1” and “Warm 2”
The offset value for Color Temerature “Neutral”, “Warm 1”, and “Warm 2” is set in NVM Data as shown in the table below.
Note: The offset values in the table below have been applied from NVM version “TD1009E”. (PKG version isPKG1016).
40" 46"
Neutral Warm 1 Warm 2 Neutral Warm 1 Warm 2
WB_B01_OFST
119 119 99 123 117 99
WB_B02_OFST 113 104 74 114 104 82
WB_B03_OFST
107 89 49 105 91 65
WB_B04_OFST
111 97 66 108 94 71
WB_B05_OFST
101 79 49 99 76 46
WB_B06_OFST
98 74 41 94 67 33
WB_B07_OFST
91 61 32 90 58 21
WB_R01_OFST
129 128 140 130 126 135
WB_R02_OFST 130 127 138 130 127 134
WB_R03_OFST
131 126 141 129 126 137
WB_R04_OFST
129 128 134 127 126 137
WB_R05_OFST
129 128 137 129 125 136
WB_R06_OFST
129 128 139 130 125 135
WB_R07_OFST
129 128 140 130 125 135
No adjustment of this data is necessary as it is fixed during manufacture.
3-5. Panel Replacement
When replacing the panel please reset the gamma and white balance before performing W/B (See page 16, 3-4) for new panel.
3-6. Board Replacement
When replacing the ‘BE1F’ board please readjust the AD (See page 14, 3-2) and readjust the W/B (See page 16, 3-4).
Note :
In the event of a ‘BE1F’ board being re-used in service, please ensure that the Serial number is cleared in the NVM.
3-7. TT Modes
81
Digital BER Display
84
TS CI Path Through
91
Disable software Download
92
TS CI Path Through With ReadSolomon Off
93
LNA Setting On/Off (Toggle)