Need help?Do you have a question about the Sony KDL-40V3000 and is the answer not in the manual?
General| Audio system | B/G, D/K, I, L, NICAM |
|---|---|
| RMS rated power | 20 W |
| Sound output mode | 3 |
| Noise reduction | Yes |
| Comb filter | Digital |
| Response time | 8 ms |
| Display diagonal | 40 \ |
| Display brightness | 500 cd/m² |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Contrast ratio (dynamic) | 16000:1 |
| Contrast ratio (typical) | 1800:1 |
| Tuner type | Analog & digital |
| Supported TV bands | CATV, UHF, VHF |
| Analog signal format system | PAL, SECAM |
| AV input | RCA |
| SCART ports quantity | 2 |
| Digital audio optical out | 1 |
| Picture enhancement | BRAVIA ENGINE |
| Headphone connectivity | 3.5 mm |
| Cables included | AC |
| Remote control type | RM-ED009 |
| Product color | Black |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 169 W |
Weight and Dimensions| Depth (with stand) | 265 mm |
|---|---|
| Width (with stand) | 992 mm |
| Height (with stand) | 688 mm |
| Weight (with stand) | 24000 g |
| Depth (without stand) | 122 mm |
| Height (without stand) | 643 mm |
| Weight (without stand) | 20000 g |
Explains the self-diagnostic software and LED error codes for troubleshooting.
Instructions for removing the BE1F main board.
Guide on accessing the service menu using the remote commander.
Procedures for adjusting signal levels for analog and video inputs.
Steps for performing gamma adjustments, including preparation.
Detailed steps for adjusting white balance for various color temperatures.
Illustrates the functional blocks of the TV chassis.
Identifies the physical locations of key circuit boards within the chassis.
Provides detailed schematic diagrams and printed wiring board layouts.
Comprehensive list of parts for the G3 circuit board.
Comprehensive list of parts for the BE1F circuit board.
To Next Page