be connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an
adapter (not supplied). If this is the case, connect the adapter to the
computer before connecting the HD15-HD15 cable.
It is recommended to use a PC cable with ferrite cores.
To input PC sound, connect to the AUDIO IN jack on the rear of the TV
using an audio cable.
AUDIO OUT/
Connect with an audio cable or headphones. You can listen to TV sound through
your stereo system or headphones.
To set the sound output for headphones or an external audio system, press
HOME, select
→ [Sound] → [Headphone/Audio Out].
When you set [Audio Out] in [Headphone/Audio Out], select [Fixed] or
[Variable], press HOME, select
→ [Sound] → [Audio Out].
Return to Top
Copyright 2011 Sony Corporation
To Next Page
Loading...
