i
[ For EU and EFTA countries ]
CE Notice
Making by the symbol CE indicates compliance of the
EMC directive and the Low-voltage directive of the
European Community. Such marking is indicative
meets of exceeds the following technical standards.
EN 55 011 Group 1 Class A / 91 :
"Limits and methods of measurement of
electromagnetic disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency
equipment"
EN 50 082-2 / 95 :
"Electromagnetic compatibility - Generic immunity
standard Part 2 : Industrial environment"
EN 61 010-1 A1+A2 :
"Safety requirements for electrical equipment for
measurement, control and laboratory use Part 1:
General requirements"
[For the customers in Australia]
Australian EMC Notice
This product complies with the following Australian
EMC standards.
AS/NZS 4252.1 /94 EMC Generic Immunity Part1
AS/NZS 2064.1 /91 EMCISM Equipment
警告
本装置を機械指令(EN60204-1)の適合を受ける機器
にご使用の場合は、その規格に適合するように方策
を講じてから、ご使用ください。
Warning
When using this device with equipment governed by
Machine Directives EN 60 204-1, measures should be
taken to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüsttungsteilen vermendet
wird, die von die Maschinenrichtlinien EN 60 204-1
geregelt werden, müssen Maßnahmen erggriffen
werden, um Übereinstimmung mit diesen Normen zu
gewährleisten.
To Next Page
Loading...
