Help Guide
Wireless Noise Canceling Stereo Headset
LinkBuds S
Resetting the headset
If the headset cannot be turned on or cannot be operated even when it is turned on, reset the headset. Reset one of the
headset units at a time.
Set one of the headset units into the charging case.
Leave the lid of the charging case open.
1
Press and hold the reset button of the charging case for about 20 seconds or more.
After about 15 seconds, the indicator (orange) on the charging case flashes slowly for about 5 seconds.
Then, the indicator on the charging case turns off and the headset will be reset.
When resetting is complete, the indicator (orange or green) on the charging case lights up for about 3 seconds to
show the remaining battery charge of the headset, and then turns off.
2
Check that the indicator turns off and then release your finger.
3
Remove the headset unit from the charging case and start the operation again from step
with the other
headset unit.
4
To Next Page
Loading...
