Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
Note
When connecting, [LinkBuds S], [LE_LinkBuds S], or both may be displayed on the connecting device. When both or [LinkBuds
S] is displayed, select [LinkBuds S]; when [LE_LinkBuds S] is displayed, select [LE_LinkBuds S].
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform the pairing
again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.
Related Topic
Wearing the headset
Using only one unit of the headset
How to make a wireless connection to Bluetooth devices
Pairing and connecting with an iPhone
Listening to music from a device via Bluetooth connection
Disconnecting Bluetooth connection (after use)
5-035-792-11(1)
Copyright 2022 Sony Corporation
You will hear a notification sound from both headset units (or from the headset unit you are wearing) at the same
time.
To Next Page
Loading...
