66
English
#™ Start, #£ Reset input
#∞#§ Comparator value selection input
7-3. Interface cable
• Use a shielded cable with thickness less than φ8.7 mm,
and length under 2 m.
In addition, connect the shielded cable of the connected
equipment to frame GND.
• The plug case is connected to FG of LT10/LT11.
Connect the braided wire to the case after folding back
and securing with the metal clips.
Assembling the plug provided
Fold back the braided wire and
secure with the metal clips.
Cable
Case
Plug
Case
I N
MIN. 5 ms MIN. 4 ms
I N
DATA (OUT)
MAX. 50 ms
To Next Page
Loading...
