Sony Mavica MVC-CD1000 - Viewing Images on a TV Screen

masterpage:Right
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\08adv.fm]
B
BB B Various playback
59
model name1[MVC-CD1000]
[3-062-473-12(1)]
To skip to the next/previous
image during the slide show
Select \b/B\ at the lower-left on the
screen.
Notes
• The interval setting time may vary
depending on the image size.
• When [REPEAT] is set to [ON], the slide
show does not end until all the images
played back, even if it takes more than 20
minutes.
Viewing images on a
TV screen
You can view images recorded onto a
disc on a TV.
Note
You cannot use a TV that has an antenna
(aerial) connector only.
1
Connect the A/V connecting
cable to the A/V OUT (MONO)
jack of your camera and to
the audio/video input jacks of
the TV.
If your TV has stereo type input
jacks, connect the audio plug of the
A/V connecting cable to the Lch
jack.
2
Turn on the TV and start
playback on your camera.
The playback image appears on the
TV screen.
to A/V OUT (MONO)
jack
Set the TV/
VIDEO switch
to “VIDEO.”
A/V
connecting
cable
01cov.book Page 59 Wednesday, July 19, 2000 10:33 AM