xviii
Adjustment
This section allows us to perform some camcorder adjustments. Select
Adjustments from the Main Menu to begin. The following window ap-
pears:
Select the adjustment that needs to be performed. We will choose SW.P.
Adjustment (Auto) by clicking on it. Follow the instructions in the dialog
box such as” insert the reference tape and click OK when complete”.
Periodically, window(s) behind the dialog box will appear showing the steps
that are being followed during the automatic adjustment. They can be
ignored.
The following Execution End screen will appear. Click OK. This ends the
adjustment and returns you to the Adjustment menu.
Test Menu
The Test section of the Radar W Main Menu is for camcorders. When
Test is chosen the following window appears with three options:
Function button check - When you press a camera button, the button’s
function will be highlighted on the screen. This is useful for troubleshoot-
ing switch problems.
Diagnosis - Will bring up a window that shows you the Self-Diagnostic
history and the present Emergency codes. You can also clear the emer-
gency information from this screen.
To Next Page
Loading...
Need help?
General
