Sony MDP-A1 User Manual

if Your TV Does Not Have Audio/Video Inputs (MOP-A1 only)
For connection, use the optional RFU-90UC (RFU adaptor).
The audio signal of the disc is reproduced in monoaural when connected to the TV via the RFU-S90UC. To enjoy the disc
in stereo, connect the player to an audio system (page 13).
CTTCTERLT TL
UCU CCTF ET
se
RK-C310/315
Audio Cable
{not suppked)
sade VS BFu-souc
(not supplied) a =
ay ay
Note on Connection:
One of the most important of your Multi Disc Player is its digital stereo sound (from either LD's or CD's). To get the
advantage of stereo sound, hook your player's L/R audio outputs to a stereo audio system or stereo TV. In addition, by
using
the
video
output
jack,
you
will
get
a
noticeably
better
picture.
To
connect
this
player
to
a
TV
without
A/V
inputs,
use
an RFU-90UC adaptor (not supplied). However, if you connect your Player this way, you will not get stereo sound, and
the picture quality will not be as good as it could be.
* Why is it necessary to select 3 or 47
The Multi Disc Player sends its output to the TV as a VHF broadcast signal. Selection an unused channel avoids
interfering with regular broadcasts. When watching regular TV programs, tum the player off or press the DISC/TV
button
on
the
Remote
Commander
so
that
you
can
obiain
a
better
picture.
If
TV
picture
quality
is
not
satisfactory,
reler
to the manufacturer's manual and adjust the reception.
When watching TV broadcast.
Always tum off the Multi Disc Player to get better reception.
During FM or AM reception
Turn off the power of the Multi Disc Player to prevent the possibility of noise interference.

Sony MDP-A1 Specifications

General

Brand	Sony
Model	MDP-A1
Category	CD Player
Language	English