Sony MDP-A1 - Time Search on Compact Discs; Searching by Elapsed Playing Time

How to Search by Elapsed Playing Time—Time Search
You can locate a particular point on a CD by specifying the elapsed playing time from the beginning of the disc.
Locate the FRAME/TIME, SEARCH/NEXT and number keys on the Remote Commander.
To Enter the Elapsed Playing Time
1
Press
the
FRAME/TIME
button.
“00.00”
appears
in
the
front
panel
display.
FRAME/TIME
1234S S7
OH
HW
oe
Bw?
B
ana
ee
2 Enter
the
desired multi-digit
number
cron
cus
corresponding
to
the
time
you
want
found.*
Enter
four digits.
Sample Entry for CDs
To
locate
the
12-minute,
5-
G)
»
(2)
@)
=
©)
second point, press the number
i d the right:
keys
in
the
order
on
the
right
If
you
press
the
wrong
key,
press
BACK
to
clear
the number, then enter the correct number.
3 Press SEARCH/NEXT on the SEARCHINEXT Play starts from the time specified in step 2.
Remote.
Before pressing the SEARCH/NEXT button,
To Cancel Time Search........... CLEAR STOP
| os) or Ca) press CLEAR. If you have already pressed the
SEARCH/NEXT button, press STOP (3).
In addition to normal play mode, you can conduct Time Search while in Repeat or Pause mode. When the specified time
appears after the search, play continues in the same mode.
* if you enter a time number not contained on the disc, play stops.
30 To Play a Compact Disc