Sony MDR DS6000 - Charging the Supplied Rechargeable Nickel-metal Hydride Battery; Inserting the Rechargeable Battery

Charging the Supplied Rechargeable
Nickel-metal Hydride Battery
The supplied rechargeable nickel-metal hydride battery is not charged from the first
time you use it.
Be sure to charge it before use.
To charge the headphones, place them
on the processor.
Inserting the supplied rechargeable nickel-
metal hydride battery
1 Open the battery compartment lid
of the left housing.
The battery compartment lid comes
off.
Left housing
2 Insert the supplied rechargeable nickel-
metal hydride
battery into the battery
compartment, matching the (±) terminal on
the battery to the (±) mark in the
compartment.
Do not attempt to charge any other kind of
battery
with this unit.
Note
The battery compartment has a tab on the e side which holds the battery in place. Insert the
e terminal first when installing the battery.
3 Close the battery compartment lid.
10
US
I
Preparation