Basic Operations
10
EN
5
Press MENU/NO twice to display “Setup Menu”.
6
Turn AMS to select “Setup 16”, then press AMS.
7
Turn AMS to select the mode you want to record in, then press
AMS.
To record in Select*
1
Stereo sound Stereo Rec
Monaural sound*
2
Mono Rec
*
1
You cannot select the mode during recording or recording pause.
*
2
In the monaural recording, you can record about two times longer than in
the stereo recording.
8
Press MENU/NO.
9
Press r REC.
The deck becomes ready to record.
10
Adjust the recording level.
When recording through the DIGITAL IN (COAXIAL, OPT1, or
OPT2) connector
Adjust the DIGITAL REC LEVEL control so that the peak
level meter in the display is a maximum of 0 dB. For details,
see page 16.
When recording through the LINE(ANALOG) IN jacks
Setting the ANALOG REC LEVEL L/R controls at 4 is
satisfactory for most purposes. For details, see page 16.
11
Press ( or P.
Recording starts.
12
Start playing the program source.
To Next Page
Loading...
Need help?
General
