10
GB
Before you start the hookup
Getting
Started
This chapter provides information on
the supplied accessories and hookups.
Be sure to read this chapter thoroughly
before you actually connect any
equipment to the deck.
Before you start the
hookup
This MD deck comes with the following items:
•
Audio connecting cords (2)
•
Remote commander (remote) (1)
•
R6 (size-AA) batteries (2)
Insert two R6 (size-AA) batteries into the battery
compartment with the + and – properly oriented to the
markings. When using the remote, point it at the remote
sensor on the deck.
z
When to replace the batteries
Under normal conditions, the batteries should last for about six
months. When the remote no longer operates the deck, replace
both batteries with new ones.
Notes
•
Do not leave the remote in an extremely hot or humid place.
•
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
•
Do not use a new battery with an old one.
•
Do not expose the remote sensor to direct sunlight or lighting
apparatus. Doing so may cause a malfunction.
•
If you don’t use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Checking the supplied accessories
Inserting batteries into the remote
To Next Page
Loading...
Need help?
General
