Setting the audio options – [AUDIO SETUP]
LETTER
BOX]
wide-mode function. Displays a wide picture with black bands on the
top and bottom.
[4:3 PAN
SCAN]
Selects this when you connect a 4:3 screen TV that does not have a
wide-mode function. Displays a full-height picture on the entire screen,
with trimmed sides.
[4:3 OUTPUT]
(for DVD VIDEO)
[FULL]
*1
Selects this when you connect a TV with a wide-mode function.
Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-
screen TV.
[NORMAL]
Changes the picture size to fit the screen size with the original picture
aspect ratio. Displays black bands on the left and right side if you
display a 4:3 screen picture.
[COLOR SYSTEM(VIDEO
CD)]
*2
(for VIDEO CD)
(Except for Latin American,
Brazilian, European, and
Russian models)
[AUTO]
*1
Outputs the video signal according to the color system of the disc.
Select this setting if your TV uses a DUAL system.
[PAL] Outputs the video signal in PAL system.
[NTSC] Outputs the video signal in NTSC system.
[PAUSE MODE]
(for DVD VIDEO)
[AUTO]
*1
The picture, including subjects that move dynamically, is output with no
jitter. Normally select this setting.
[FRAME]
The picture, including subjects that do not move dynamically, is output
in high resolution.
Default setting
*1
For details, see Hooking up TV.
*2
[AUDIO DRC]
(for DVD VIDEO)
[OFF]
*
Off.
To Next Page
Loading...
