Help Guide
Home Audio System
MHC-V43D
Turning on or off the BLUETOOTH signal
You can connect to the system from a paired BLUETOOTH device when the system’s BLUETOOTH signal is set to on.
At the time of purchase, this setting is set to on.
Note
You cannot perform the following operations when BLUETOOTH signal is set to off:
Pair and/or connect with BLUETOOTH device.
Use “Sony | Music Center.”
Change the BLUETOOTH audio codecs.
5-013-978-11(1) Copyright 2020 Sony Corporation
Hold down MEGA BASS and MIC/GUITAR LEVEL + on the system for about 3 seconds.
[BT ON] or [BT OFF] appears on the display.
1