For details, see Pairing and connecting with BLUETOOTH devices.
When the BLUETOOTH device name appears on the display, the BLUETOOTH connection is established.
Press W.PARTY CHAIN on the system.
[CHAINING] flashes on the display.
The connection to the BLUETOOTH device is terminated automatically once the system enters the Wireless
Party Chain Setup mode.
3.
Connect a second or subsequent system as a Party Guest.
The following operation is an example of connecting MHC-V43D as the second or subsequent system. Refer to the
operating instructions supplied with the device you are using to connect other devices compatible with the Wireless
Party Chain function.
3
Make sure that [BT AUDIO] is displayed on the display of the second or subsequent system.
If not, perform step
.
1.
Press W.PARTY CHAIN on the second or subsequent system.
Hint
2.
To Next Page
Loading...
