MP-CL1A 3-MPA-011-01
19
EN
Charging time: Via AC power ad
aptor (not supplied): Approx.
3.3 hours
Via USB Type A port:
Approx. 6.3 hours
Output: DC5 V/1.5 A, 1 port
*
1
Bluetooth profiles are standardized
according to the purpose of the Blu
etooth device.
*
2
Codec indicates the audio signal
compression and conversion for
mat.
*
3
SBC stands for Subband Codec.
Notes on Use
• Do not point the laser light at a
mirror, etc. as the reflected laser
light may be harmful to eyes.
• Do not use the projector in areas
where the use of wireless comm
unications devices is prohibited,
such as on airplanes or in hospita
ls. The projector emits radio wav
e and may affect electronic and
medical appliances (pacemakers,
etc.).
• Do not operate the unit if it has b
een wet or otherwise damaged, t
o prevent against electric shock, e
xplosion and/or injury.
• Magnetic or electric noise may
cause the noise from the proje
ctor to become louder or
interfere with its wireless
communications.
• While using, TV, radio or tuner i
nterference may occur. Use the
projector away from these prod
ucts.
• Access points may not be discov
ered correctly when there are m
ultiple Wi-Fi access points that u
se the same channel.
• Children should only use the pr
ojector under adult supervision.
Keep the projector out of reach
of infants.
• Do not block the ventilation holes
with hands, etc. When using the p
rojector, be sure to use the stand (
supplied) to prevent the ventilatio
n holes from being blocked. Failur
e to do so would be dangerous as
it may result in overheat of the pr
ojector.
• Do not put any foreign objects in
the ventilation holes.
• Do not insert your fingernails into
the ventilation holes and other sl
ots, nor hook your fingernails on t
he gaps while using the projector.
• Do not short-circuit the projector.
Do not allow metal objects such a
s hairpins to come into contact wi
th the projector or its terminals.
• Do not disassemble or modify
the projector.
To Next Page
Loading...
