Sony MP-CL1A - Powering the Projector On and Off; Using the Lens Cover Stand

MP-CL1A 3-MPA-011-01
8
EN
Turning the power on
1 Press and hold the  (power) button for longer than one second.
The  (power) lamp lights.
To turn off the projector, press and hold the  (power) button for
longer than one second.
Using the lens cover stand
When protecting the projector's lens
Attach the lens cover stand by sliding from left to right.
1 2
When projecting on a wall or in front
Attach the lens cover stand by sliding from left to right, then rotate
the stand and adjust the tilt of the projector to set the projection p
osition.
1 2