— 10 —
6. Adjustment
6-1. Starting Up “Dencho for DDX-G2100”
Install the “Dencho for DDX-G2100” in a personal computer as
follows.
1) Start up “Dencho for DDX-G2100”.
2) Click the [Engineer] button on the Select the Mode screen.
(Fig.6-1-1.)
3) Confirm that the Adjustment Menu (Engineer) screen appears.
(Fig.6-1-2.)
Fig. 6-1-1
Note: The [Operator] mode is dedicated to the simplified automatic
adjustment procedure only.
Adjustment of the respective items cannot be performed by the
[Operator] mode.
To Next Page
Loading...
