EasyManua.ls Logo

Sony MZ-N505 - Schematic Diagram - Main Board (1;4)

Sony MZ-N505
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Labeling recordings
1
Insert a disc and do the following
operations:
To label a track
Start playing or recording a track you
want to label, and label the track
while playing or recording
operations.
To label a group
Turn group mode on (page 28) and
start playing or recording a track
within the group you want to label,
and label the group while playing or
recording operations.
To label a disc
If a disc is already recorded, follow
the procedures from step 2 while the
recorder is stopped, If a disc is new,
start recording and label a disc while
recording.
If you label a disc with group settings,
turn group mode on (page 28).
2
Press MENU.
3
Press I44 or W repeatedly until
“EDIT” flashes in the display, and
then press ENTER.
4
Press I44 or FW repeatedly until
the following item appears in the
display, and then press ENTER.
When labeling a track
“T: Name”
When labeling a group
“G: Name”
When labeling a disc
“D: Name”
The cursor flashes and the track,
group, or disc is ready to be labeled.
The disc is ready to be labeled.
5
Press I44 or W repeatedly to
select a letter and press ENTER.
The selected letter stops flashing and
the cursor moves to the next input
position.
38-GB
The buttons used for character input
and their functions are listed below:
Functions
Operations
To select a
Press t44 or
character
)cH.
To enter a letter
Press ENTER .
To enter a name
Press ENTER for 2
second or more.
To insert a blank
Press VOL + and
space to type in a
END SEARCH at
new letter
the same time.
To delete a letter
Press VOL - and
and move back all END SEARCH at
following letters to the same time.
the left
To cancel labeling Press CANCEL.
6
Repeat step 5 and enter all characters
of the label name.
7
Press ENTER for 2 seconds or more.
The track or disc is labeled.
To cancel labeling,
Press CANCEL in step 6.
Notes
l
When the recording is stopped while labeling
a track, a group, or a disc during recording, or
when the recording moves on to the next track
while labeling a track, the input at that point is
entered automatically.
l
“LP:” is automatically added at the beginning
of the track name for tracks recorded in
MDLP mode (page 26).
l
You cannot label or relabel the premastered
disc or blank disc.

Table of Contents

Other manuals for Sony MZ-N505

Related product manuals