Sony NW-E99 - 2 Test Mode

5
NW-E99
SECTION 2
TEST MODE
STANDING PROCEDURE
Procedure 1: Set a dry battery into NW-E99, and keep the battery
lid open.
Procedure 2: In HOLD state, while pushing Nx and [GROUP]
button, turn power on by closing the battery lid of
NW-E99.
Procedure 3: Set HOLD state off.
After starting up test mode, the following contents can be checked.
TEST MODE
• Nx button
The KEY test mode is activated. All key inputs are completed,
then Nx button is pressed, restart. (Be aware that the
initialization is included on all key input.)
• [MENU] button
EL0 (blue) lights on/off.
• [GROUP] button
EL1 (green) lights on/off.
• -/>
All LCD lights and ACCESS LED lights off.
• ./+
All LCD lights and ACCESS LED lights on.
• [VOL +] button
BEEP turns on.
• [VOL --] button
BEEP turns off.
• [ REPEAT SOUND] button
Initialized. (Turns to the factory preset state, time, volume setting
and so on.)
The music data, files and so on in the memory are not changed.
•