Sony OA-D30V - Operation; Disk Eject Mechanism; Disk Insertion; Disk Removal

6-2. OPERATION
6-2-1. Disk Eject Mechanism
SONY's fail-safe eject mechanism prevents damage to
disk or drive by ejecting the
Micro Floppydisk in
the event it is improperly inserted. The disk will
also be ejected if the disk guard is in the closed posi-
tion.
6-2-2.
Disk Insertion
Do not force disk. Slide guard so disk surface is
exposed through head window. With metal centering
hub down, insert guard end into disk drive.
When
disk is in drive the motor will rotate; motor rotation
stops
only when disk is removed from the drive. The
Micro Floppydisk drive
is now ready for operation.
6-2-3.
Disk Removal
Depress disk eject button to remove disk. When disk
is extracted be sure to close guard to exclude foreign
contaminants.
Do not depress disk eject button if
activity
light is illuminated.
6-3. DISK PRECAUTIONS
The following precautions will assure full disk life
and maximum data integrity:
a) Do not store disk with guard open
b) When handling disk do not touch exposed
disk surface
c) Keep disks away from magnetic materials
d) Do not expose disks to excessive heat or
direct
sunlight
e) Never attempt to clean disk surface. This
may
result in damage to disk or drive head.
6-4.
DISK ENVIRONMENTAL LIMITS
Operating: Temperature SO--140°F 10--60°C)
Humidity 8 -- 80 % RH
Storing: Temperature SO--140°F 10--60°C)
Humidity 8 -- 80 % RH
Transporting: Temperature -40 -- 140°F (-40 -- 60°C)
Humidity 8 -- 80 % RH
(Maximum wet bulb temperature:::; 85°F (29.4°C))
- 18-