Sony PS-LX2 - Turntable Assembly; Assembly Steps

PARTS IDENTIFICATION
The picture below shows the appearance of the assembled turntable.
Disc Centering Guides
Center Spindle
Rubber Mat
SPEED Selector
Counterweight
Tracking Force Ring
Platform
Anti-skating Compensator
Button[i / ▼ .]
ECT Button
SERVO LOCK Indicator
Arm Rest
Locking Collar
Shell
TURNTABLE ASSEMBLY
Do not connect the power cord or the connecting cords until the
turntable has been completely assembled.
Remove all packing material and wipe the cabinet off.
Save the packing box and materials for possible future use.
The numbers in the illustration refer to the sequence of assembly.
O Keep the metallic parts indicated by the arrows in the illustration
inside the large white gear.
€> Carefully place the platter on the motor board by fitting the
center hole over the center spindle. Be careful that no foreign ob¬
jects lodge under the platter.
• Do not touch the magnetic coating or the magnetic pick-up head.
0 Place the rubber mat on the platter.
Disc centering guide installation
Insert the supplied disc centering guide as illustrated.
30 cm record
3