SERVICE MANUAL
Sony Corporation
Audio&Video Business Gourp
Published by Sony Techno Create Corporation
PS-LX300USB
SPECIFICATIONS
STEREO TURNTABLE SYSTEM
9-887-948-03
2008I05-1
©
2008.09
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Ver. 1.2 2008.09
• IBM and PC/AT are registered trademarks of
International Business Machines Corporation.
• Microsoft, Windows and Windows Vista are
either registered trademarks or trademarks of
Microsoft Corporation in the United States and
/ or other countries.
• Sound Forge is a trademark or registered trade-
mark of Sony Creative Software Inc. in the
United States and other countries.
• All other names of systems and products are
trademarks or registered trademarks of their re-
spective owners.
TM
and
®
marks are omitted in
this manual.
Motor and Platter
Drive system:
Belt-drive
Motor:
DC motor
Platter:
295 mm dia. (aluminum die-cast)
Speeds:
33
1
/
3
and 45 r/min, 2 speed
Wow and utter:
Less than 0.25% (WRMS)
Signal to noise ratio:
More than 50 dB (DIN-B)
Tone Arm
Type:
Dynamic balanced straight-shaped with
so damping control
Eective arm length:
195 mm
USB jack
Power supply:
USB bus power compliant (5 V, 100 mA)
(e power is supplied by the PC which is
connected with an attached USB cable)
Output jack:
Plug-in-power system (Dedicated USB
jack)
USB series B connector
USB (full-speed)
General
Power requirements:
North American model:
120 V AC, 60 Hz
Other models:
230 – 240 V AC, 50/60 Hz
Power consumption:
2 W
Dimensions:
A
p
p
rox. 420 × 95 × 360 mm (16
1
/
2
× 3
5
/
8
×
14
1
/
4
in) (w/h/d)
Mass:
3.3 kg (7 lb 5 oz)
Supplied Accessories:
45 r/min adaptor (1)
Platter (with drive belt) (1)
Rubber mat (1)
USB cable (1)
CD-ROM (1)
Operating Instructions
e installation guide for “Sound Forge
Audio Studio LE”
Design and specications are subject to change
without notice.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
