Sony PS-LX40 - User Manual

US Model
PS-LX43P
AEP. Madel
PS-LX40P/LX43P
UK Model
PS-LX40P/LX43P/LX44P
E Model
PS-LX40/LX40P/LX43P
Photo : PS-LX40
SPECIFICATIONS
Turntable
Platter 30 cm
Motor DC servo motor
Drive system Belt drive
Speed 3314/3 rom/45 rom switchable
Wow and flutter 0.2% (WRMS)
Signal-to-noise ratio 50 dB (DIN-B)
Automatic system Return, reject
Tonearm
Type Statically balanced
Pivot-to stylus length
203 mm
Overallarm length 235mm
Cartridge
Type Moving magnet type
Frequency response 20 Hz — 20kHz
Stylus ND-155G
General
Dimensions Approx. 355 x 95 x 345 mm
(14x3¥%,x« 13, inches)
Weight PS-LX40 : Approx. 2.5 kg
PS-LX40P/LX43P/LX44P :
Approx. 2.1 kg (4 Ib 11 02)
Power requirements PS-LX40:110 — 120 V, 220 —- 240 V AC adjustable,
50/60 Hz
PS-LX40P/LX43P/LX44P :
12V DC. Supplied from STEREO DECK
RECEIVER (HST-).
Power consumption 4W
Accessory supplied 45-rpm adaptor (1)
Optional accessories
Replacement stylus ND-155G
Design and specifications subject to change without notice.
REPLACING THE STYLUS
Replace the stylus after about 400 hours of use because using a
worn stylus will damage records.
An ND-155G replacement stylus is available at your Sony dealer.
Be sure to turn the amplifier off before proceeding with
replacement.
1 While holding the cartridge, detach the stylus assembly as
illustrated.
2 Insert the new stylus into the cartridge.
STEREO
TURNTABLE
SYSTEM
SON
Y.

Sony PS-LX40 Specifications