Sony PXW-FS7M2 - Page 73

000
5. Menu Display and Settings: Setup Menu List
73
System >Lens
Sets settings related to lenses.
Item Sub-item setting Description
Distortion
Comp.
Auto / Off Turns automatic distortion compensation
on/off.
[Notes]

Not available in picture cache recording mode
or when recording.

Distortion compensation is not applied during
4K or QFHD recording.

When Auto is selected, there are some
restrictions on Monitor LUT (page 85).
System >Language
Sets the display language.
Item Sub-item setting Description
Select Sets the display language.
SET: Set language.
System >Clock Set
Sets internal clock settings.
Item Sub-item setting Description
Time Zone UTC – 12:00 to UTC + 14:00 Sets the time difference from UTC in
30-minute units.
Date Mode YYMMDD / MMDDYY / DDMMYY Selects the display format for dates.
YYMMDD: Year, month, day
MMDDYY: Month, day, year
DDMMYY: Day, month, year
12H/24H 12H / 24H Selects the clock display format.
12H: 12-hour mode
24H: 24-hour mode
Date Sets the current date.
SET: Set the value.
Time Sets the current time.
SET: Set the value.
System >Country
Sets the region of use.
Item Sub-item setting Description
NTSC/PAL
Area
NTSC Area / PAL Area
The default setting varies depending on the
country of purchase.
Sets the region of use.
System >Hours Meter
Displays the accumulated running time.
Item Sub-item setting Description
Hours (System) Displays the accumulated hours of use
(cannot be reset).
Hours (Reset) Displays the accumulated hours of use (can
be reset).
Reset Execute / Cancel Resets the Hours (Reset) display to 0.
Execute: Reset
System >Basic Authentication
Sets basic network authentication settings.
Item Sub-item setting Description
User Name User name
(admin)
Sets a desired user name (1 to 16
alphanumeric characters).
SET: Set the value.
Password Password
(pxw-fs7m2)
Sets a password (1 to 16 alphanumeric
characters).
SET: Set the value.
System >Wi-Fi
Sets wireless LAN connection settings.
Item Sub-item setting Description
Wi-Fi Enable / Disable Enables/disables Wi-Fi.
SSID &
Password
Displays the SSID and password.
Wi-Fi Direct
Connection
Execute / Cancel Starts a Wi-Fi Direct network connection.
Execute: Connect
Client Displays information about the connected
client device (model name and MAC
address).
IP Address 192.168.1.1 Displays the IP address of the camcorder.
[Note]
Not displayed when using the CBK-WA100.
Subnet Mask 255.255.0.0 Displays the subnet mask.
[Note]
Not displayed when using the CBK-WA100.
MAC Address Displays the MAC address of the Wi-Fi
module attached to the camcorder.
Regenerate
Password
Execute / Cancel Creates a new password.
Execute: Regenerate