Sony R-D-S EON STR-D365 - Receiver Operations; Selecting a Component

_ Receiver Operations
8°
ae ee a
Selecting a Component
To listen to a connected component, first select the
function on the receiver or with the remote.
Before you begin, make sure you have:
* Connected all components securely and correctly as
indicated on pages 5 to 7.
¢ Turned VOLUME to the leftmost position (0) to
avoid damaging your speakers.
POWER VOLUME
Function buttons
1 Press POWER to turn on the receiver.
Using SYSTEM OFF on the remote puts the receiver
in STANDBY mode. Press POWER while holding
down the TUNER button to turn on the power using
the receiver when it is in STANDBY mode.
2 Press a function button to select the component you
want to use:
Tolistento.~~~SPress—=SSSCS
Records PHONO
Radio programmes TUNER
Compact discs (CD) CD
Audio tapes or MiniDiscs (MD) TAPE/MD
Video tapes VIDEO
TV programmes or Laser discs TV/LD
3 Turon the component, for example, a CD player,
and then start playing.
To tune in radio stations on this receiver, see
“Receiving Broadcasts” on page 9.
4 Tum VOLUME to adjust the volume.
a a
To Do this
Mute the sound Press MUTING. Press again to
restore the sound
Reinforce the bass Press BASS BOOST to turn on
the BASS BOOST indicator.
Adjust
the
balance
Turn
the
BALANCE
control
left
or
right.
Adjust
the
tone
quality
Adjust
the
BASS
and
TREBLE
controls.
o When you listen with headphones
Connect the headphones to the PHONES jack and set the
SPEAKERS buttons to OFF.
Using the remote
The remote lets you operate the receiver and the Sony
components that are connected to it.
SYSTEM OFF
FUNCTION
C3 Co Co
ea en J Bae
1
Press
one
of
the
FUNCTION
buttons
to
select
the
component
you
want
to
use.
The
FUNCTION
buttons
on
the
remote
are
factory-
set
as
follows:
To listen to Press
Radio programmes TUNER
Compact discs (CD) cD
Audio tapes TAPE/MD
VHS Video tapes VIDEO
(VTR-3 mode)
TV programmes TV/LD
If you want to change the factory setting of a button,
see page 9.
The receiver and the selected component turn on.
if the component does not turn on
Press the power switch on the component.
2 = Start playing.
Refer to “Remote Button Descriptions” on page 17
for details.
To turn off the components
Press SYSTEM OFF. You can turn off the video and audio
components connected to the SWITCHED AC OUTLET at the
same time. (STR-D365 only)
Key if you use a Sony TV
When you press TV to watch a TV programme, the TV
turns on and switches to the TV input. The TV also turns
on when you press VIDEO or TV/LD and switches to the
appropriate video input.
If the TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote supplied
with TV.