Sony RM-E700 - Page 16

Clearing All Cuts
Deleting a Cut
How to clear all the designated Cuts in the program is
explained here. Use this procedure also to clear the
previous program.
When you want to delete a Cut in the program, first delete
the IN point and then the OUT point.
< Let's delete Cut 5 for example.
OJSC TEME When deleting the Cut during programming, skip step 1.
Operation When clearing all Cuts during programming, skip step 1.
Press the PGM button.
The IN point of Cut 1 appears for
about 3 seconds, and then the
current counter of the player
appears.
Current counter —_ flashing
of the player
3
Press the AC button.
All the designated Cuts are cleared
from memory. “ ” appears
for about 3 seconds, then the
current counter of the player
appears. The RM-E700 now
accepts the designation of the IN
point of Cut 1.
nm
2
B55 i
When you do not want to
enter a new program, press
the PGM button.
Seo
opr
Pam
G.5 3. i Ss
Press the PGM button.
The IN point of Cut 1 appears for
about 3 seconds, and then the
current counter of the player
appears.
Current counter of the player —_ flashing
Repeat pressing the <=-PGM
or PGM- button until the
CUT IN indication for Cut 5
appears.
The IN point of Cut 5 appears for
about 3 seconds, and the current
counter of the player appears.
Press the C button.
The IN point of Cut 5 is cleared
from memory. “ ” appears
for about 3 seconds, and then the
current counter of the player
appears.
= (25) ™
0.5 5. 18.
Locate the OUT point of Cut 5
by pressing the PGM=>
button.
The OUT point of Cut 5 appears for
about 3 seconds, and then the
current counter of the player
appears.
Press the C button.
The OUT point of Cut 5 is cleared
from memory. " appears
for about 3 seconds, and then the
current counter of the player
appears.