Sony RM-VL610T User Manual

Startup Guide
This guide shows you how to set the Remote Commander to operate your components.
First, find the four-digit component code number for your component, referring to the supplied
“Component code numbers.”
Example: To set up a TV of the code
number “8011”
1 Set the Remote Commander for code
input mode.
2 Press the desired Component Select
button.
3 Enter the code number.
4 Finish setting.
Press SET and MENU.
Press ENT.
You can search for the component code
available for your component.
1 Set the Remote Commander for code
input mode.
2 Press the desired Component Select
button.
3 Transmit code number signals in turn.
4 Finish setting.
Press SET and MENU.
Press ENT.
For more details, see page 10.
Press PROG + or PROG –, and then 1.
Repeat until your component reacts.
If you have the code number If you cannot find the code
number
For more details, see page 8.
3
Continued

Sony RM-VL610T Specifications

General

Brand	Sony
Model	RM-VL610T
Category	Remote Control
Language	English