1 Place the RM-VL610T head to head with
your VCR’s remote control.
2 Set the RM-VL610T for “learning” mode.
Press and hold SET for at least 3 seconds
until the SET indicator flashes.
3 Press the desired Component Select
button.
If your component does not work as supposed even if the code number is set, make the
RM-VL610T “learn” the functions of your component’s remote control.
Learning function
Example: To “teach” the H (play) signal of your video cassette recorder to the VCR H button of
the RM-VL610T
4 Press the button you want to
“teach.”
5 Press and hold the H (play)
button of your VCR’s remote
control until the VCR button of
the RM-VL610T lights up.
6 Repeat Steps 4 and 5 to “teach”
other functions.
7 Finish setting.
For more details, see page 12.
Press SET.
VCR’s remote
control
RM-VL610T
5 – 10 cm
(2 – 4 inches)
away (approx.)
4
To Next Page
Loading...
Need help?
General
