Sony RM-VZ950T User Manual

28
GB
Changing the Name of the
Component (NAME) (continued)
Each time you turn the Jog dial,
the characters change as listed
below:
Capital letters of the English
alphabet.
Small letters of the English
alphabet.
Numbers 0 to 9
Symbols –, . (dot), /, ?, :
(colon), @, <<, >>, (space)
Tip
It is useful that you take a note of
the names.
5 Press the Jog dial to move
to the next character field,
and enter the next
character.
You can enter up to six
characters.
You can freely change a
character by pressing b or B to
move the cursor to the desired
character field.
Note
If you press SET during this
procedure, the name written thus
far is saved as the new name.
After you finish entering the
sixth character, “EXIT” flashes
in the display.
6 Press the Jog dial.
The component name of the
next Setting position number
flashes in the display.
If you want to change the name
for another component, repeat
from Step 3.
7 Press SET.
The newly written component
name appears in the display.
-3S
R
MENA
CS
IT
MENA
XE
-4S
D
MENA
VD
NYOSDV

Sony RM-VZ950T Specifications

General

Brand	Sony
Model	RM-VZ950T
Category	Remote Control
Language	English