BDP-BX39/S390
7-13
Network （Network Test: Ping）
Outline
Ping Test for the wired Ethernet.
(Window 1)Ping Test
Operation:
[LEFT] Select Ifconfig Test.
[DOWN] Ping execution preparation.
[RET] Return to Service Top Menu.
(Window 2) The IP address of the Ping point is set up.
IP address input mode
When “Ping to :>” is reversed, [ENT] is pushed and IP is inputted.
Operation:
[ENT] Finish to input.
[RET] Finish to input.
[LEFT] Finish to input and Select Ifconfig Test.
[(NUM)] Input Character sting ‘0-9’
[TIME] Input Character sting ’.’
[CLEAR] Backspace
(Windows3): Ping Test Active
When [START] is reversed, [ENT] is pushed and execute ping .
Operation:
[ENT] Activate Ping Test
[UP] The IP address of the Ping point is set up.
[RET] Return to Service Top Menu.
Front Panel Display
NET
(Window 1)
* Network
Test: Ifconfig
Ping To :
[START]
Ping To :
Ping
(Window 2)
* Network
Test: Ifconfig
Ping To :
[ENT] : Release
[RET] : Release
[LEFT] : Ifconfig Test
[(NUM)]: ‘0-9’
[TIME] : ‘.’
[CLEAR]: Backspace
Ping To :> 192.168.200.13
Ping
(Window 3)
* Network
Test: Ifconfig
Ping To : 192.168.200.13
PING 192.168.200.13 OK!
[HELP]: [ENT]:Start [UP][LEFT]
Ping
[START]
To Next Page
