BDP-BX39/S390
7-14
W
Version Up （using Update DISC）
(
(Window 1)
* Version Update
[ENT] Start Update
[RET] Return to Top Menu
HELP : [ENT][RET][(NUM)]
Outline:
update software using DISC
(Window 1)Version Up Menu
Operation:
[1] Start Update →(Tray Open and go to window 2)
[UP] Move Up cursor
[DOWN] Move Down cursor
[ENT] Activate the selected cursor.
[RET] Return to Service Top Menu.
(Window 2)Place the Update Disc
Operation
[ENT] Tray Close and check DISC.
[RET] Cancel Update (Tray Close and return to window 1)
(Window 3) Disc Check and OK (Right DISC)
Operation: start update sequence automatically and reboot.
After reboot, please open tray and eject Update Disc manually.
(Window 4) Disc Check and NG (not update DISC)
Operation: [Error] ･･･（error message） and wait.
open tray automatically.
Front Panel Display
DISC Insert INSCD
CHECK Mount CHECK
DISC Check NG CHKNG
DISC Check OK CHKOK
(Window 2)
* Version Update
Insert update DISC ...
[ENT] Tray Close and Check start
[RET] Cancel
HELP: [ENT][RET]
(Window 3)
* Version Update
Now, mounting and checking... OK
(Window 4)
* Version Update
Insert update DISC ...
[ENT] Tray Close and Check start
[RET] Cancel
[Error] Cannot mount this DISC!
HELP: [ENT][RET]
*When Upgrade Started (Window 5)
Set will reboot to upgrade mode same as
customer version.
When upgrade is finish set will tray out
and power OFF.
(Window 5)
* Version Update
Upgrading, do not shut down the power.
To Next Page
Loading...
