Using your headset
Using your headset to handle phone calls
Use the headset to handle incoming calls, for example, to answer or reject a call.
To answer a call with the headset
•
When you hear an incoming call signal, press .
To end a call
•
During an ongoing call, press .
To reject a call
•
When you hear an incoming call signal, press and hold down .
To answer a second call
•
When you hear an incoming call signal during an ongoing call, press . The
ongoing call is put on hold.
You can also press
or to switch to another call and put the current call on hold.
To reject a second call
•
When you hear an incoming call signal during an ongoing call, press and hold
down
.
To mute and unmute the microphone during a call
•
Press and hold down to mute the microphone. To unmute the microphone,
press and hold down again.
Using your headset to listen to music
You can listen to music from your phone or another Bluetooth® compatible device
using your headset.
To listen to music
1
Open the music player application in your device and select a track that you
want to listen to.
2
Press to play the track. To pause the track, press again.
To move between tracks
•
Press or .
To fast forward or rewind a music track
•
Press and hold down or to fast forward or rewind until you reach the
desired position.
Using your headset with two devices simultaneously
Your headset has two different connection modes: Multipoint mode and Singlepoint
mode. Multipoint mode helps you manage two connections at the same time. For
example, if you connect your headset with two phones, you can receive calls from
both phones without having to disconnect and reconnect. Multipoint mode is enabled
by default. If you stop using one of two connected devices, you should switch to
Singlepoint mode manually.
8
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
