40 US
To save the stored operation
on a memory card
Press the R2 button while holding
down the ✕ button.
A round mark appears on the
upper right of the screen (Dqh).
Note
You can store only one custom
SoundScope operation setting. If the
data already exists, it is erased.
To load the data onto a
memory card
Press the L2 button while holding
down the ✕ button.
A round mark appears on the
upper left of the screen (Dqj). To
use the loaded data, follow the
procedure above.
Enjoying SoundScope (Continued)
D
qf qg
qh qj
To Next Page
Loading...
