SDM-S71(E) 4
POWER SAVING FUNCTION
This monitor meets the power-saving guidelines set by VESA,
ENERGY STAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption as shown below.
SDM-S71
* When your computer enters the “active off ” mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 20 seconds,
the monitor enters the power saving mode.
**
“deep sleep” is the power saving mode defined by the Environmental
Protection Agency.
***
If only the horizontal or vertical sync signal is input to the monitor,
the power indicator may alternately flash green and orange.
Power mode
1
normal
operation
45 W (max.) green
active off*
(deep sleep)**
3 W (max.) orange ***
power off 3 W (max.) off
Power consumption
(power)
indicator
To Next Page
Loading...
