Additional Operations 37
Programme 1
Programme 2
Programme 1
Programme 2
about 20 seconds will be cut off
Will be cut off
about 20 seconds
3 Press CURSOR >/. to select the setting you
want to change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
4 To change the setting, press CURSOR ?/
/ to flash the item you want to change,
and press CURSOR >/. to reset it.
To cancel the setting, press CLEAR.
5 Press OK.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
DATE
LP
TIMER
PROG
TODAY 35
SP / LP
SELECT
SET
OK
:
:
:OK
WE21.9
TIME
19:00 20 :00
To Next Page
Loading...
