To Next PageTo Next Page
Need help?Do you have a question about the Sony SLV-ED313 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | SLV-ED313 |
| Type | VCR |
| Video Format | VHS |
| Remote Control | Yes |
| Hi-Fi Stereo | Yes |
| Number of Heads | 4 |
| Tuner | Yes |
| Recording Speed | SP, LP |
| Playback Speed | SP, LP |
| Connections | RF, Composite Video |
| Inputs | RF, Composite Video |
| Outputs | RF, Composite Video |
Initial setup procedures for VCR operation, including remote and TV connection.
Instructions for essential VCR functions like playing tapes and setting color system.
Methods for searching tapes using index, blank section, or time-based functions.
Advanced VCR operations like playing at various speeds and setting recording duration.
Procedure for disassembling the upper case and front panel block.
Steps for removing DM-98, DI-81, FJ-31 boards and rear panel.
Disassembly of the rear panel, MA-402 board, and mechanism deck components.
Illustrations of internal components and locations of circuit boards.
A comprehensive overview of the VCR's interconnected functional blocks.
Detailed diagram illustrating the video signal processing paths within the VCR.
Diagram showing the servo and system control circuits, including motor and sensor interfaces.
Diagram illustrating the audio signal processing, including Hi-Fi and normal audio paths.
Diagram showing the tuner circuit and its interface with other system components.
Diagram detailing the mode control logic and interfaces with user input boards.
Diagram illustrating the power supply circuitry and its distribution to various VCR sections.
Overall schematic showing interconnections between major boards and components.
Detailed diagrams and layouts for various VCR circuit boards.
Pin function descriptions for IC101 related to video block interface signals.
Pin function details for IC101 in the servo peripheral circuit interface.
Pin function specifications for IC101 related to the mechanism block interface.
Pin function details for IC101 in the audio block interface, including signal statuses.
Pin function descriptions for IC101 (MA-402) covering servo, system control, and OSD functions.
Pin function details for the NICAM processor IC1 on the NK-11 board.
Pin function details for the ZWEITON processor IC001 on the GK-12 board.
Explanation of error codes and corresponding mode codes displayed on the VCR.
Guidance for mechanical adjustments, referring to another manual.
Steps for electrical adjustments, including pre-adjustment, power supply, and sequence.
Adjusts RF switching position for tape playback compatibility and screen stability.
Adjusts audio system for both Lch and Rch, including Hi-Fi and normal audio.
Adjusts tuner system for optimal audio signal separation.
Diagrams showing the location of adjustment points on specific boards.
Visual breakdown of parts for front panel, upper case, and mechanism deck sections.
Comprehensive list of electrical components for various boards including MA-402, NK-11, etc.
