Sony STR-DG1000 - Settings for the Tuner (Tuner Settings Menu); Naming Preset Stations

63
GB
Amplifier Operations
Notes
• Matrix decoding conforming to Dolby Digital EX
is applied regardless of the surround back decoder
mode setup when a sound field for a movie is
selected.
• Matrix decoding conforming to Dolby Digital EX
is applied if the speaker setting is 6.1 channel
system and movie decoding conforming to Pro
Logic IIx is applied if the speaker setting is 7.1
channel system, when you select Dolby PLIIx MS
under the following conditions:
– a Dolby Digital Surround EX signal is input
– “SB DECODING” is set to “AUTO”
Settings for the tuner
(Tuner Settings menu)
You can use the Tuner Settings menu to set the
FM station receiving mode and to name preset
stations.
Select “Tuner Settings” in the Setting menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 54) and
“Overview of the menus” (page 55).
x FM MODE
(FM station receiving mode)
•STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN?
(Naming preset stations)
Lets you set the name of preset stations. For
details, see “Naming inputs” (page 90).
Tuner Settings menu parameters