9 Reenter the new lock code with the
numeric buttons.
"CHANGED" appears on the display.
To listen to the locked channels
1 Press TUNER repeatedly to select
"SIRIUS".
You
can also use INPUT SELECTOR on
the receiver.
2 Select a locked channel you want to
listen using Direct Tuning (page 70).
"LOCKED" appears on the display.
3 Enter your 4-digit lock code using the
numeric buttons.
The channel is tuned
in.
To cancel the Parental Lock
1 Press TUNER repeatedly to select
"SIRIUS".
You
can also use INPUT SELECTOR on
the receiver.
2 Select a channel you want to unlock
using Direct Tuning (page 70).
"LOCKED" appears on the display.
3 Enter your 4-digit lock code using the
numeric buttons.
The channel is tuned in.
4 Press AMP MENU.
"I-LEVEL" appears on the display.
S Press
+1+
repeatedly to select
"4-TUNER".
6 Press 8
or
+ to enter the menu.
7 Press
+1+
repeatedly to select
"PARENTA~'.
8 Press
8)
or + to enter the parameter.
9 Press
+1+
repeatedly to select "OFF",
then press
8 .
"LOCK" appears on the display.
1OEnter your 4-digit lock code using the
numeric buttons.
"UNLOCKED" appears on the display.
Notes
• When you select a channel using Category Tuning,
locked channels are skipped.
• When the receiver is reset to the factory settings,
the lock code returns to the default (0000), but the
Parental Lock settings are not removed.
• You cannot preset locked channels. If you set the
Parental Lock for a preset channel, the preset
information for that channel returns to the default.
• You cannot set the Parental Lock for channel 0 or
channel 184.
-
continued------
73
US