Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function
is
being
used, the audio input mode is set to
"ANALOG"
automatically. You cannot select other modes.
Listening
to
digital
sound
from
other
inputs
(DIGITAL
ASSIGN)
You can reassign digital audio input that has
OPTICAL or COAXIAL (SAT IN, DVD IN)
signals
to
another input when they are not
currently being used.
For example, to output the sound source for
the DVD player using the OPTICAL
IN
jack
on the receiver:
• Connect the optical output jack
of
the DVD
player to the OPTICAL SAT IN jack of the
receiver.
• Assign "SAT OPT"
to
"DVD"
in
the
"D. ASSIGN" setting.
1 Press AMP MENU.
"I-LEVEL" appears on the display.
2 Press
+'+
repeatedly to select
"S-AUDIO".
3 Press 8 or + to enter the
menu.
4 Press
+'+
repeatedly to select
"D. ASSIGN".
5 Press 8 or + to enter the
parameter.
6 Press
+,+
repeatedly to select a
vacant digital audio input
("SAT OPT" in the example).
7 Press 8 or + to enter your
selection.
-
o
-
:::T
CD
.,
conffnued-----------
89
US
To Next Page
Loading...
