• Dolby Pro Logic IIx
Technology for
7.1
channel (or
6.1
channel)
playback. Along with audio encoded
in
Dolby
Digital Surround EX,
5.1
channel Dolby
Digital encoded audio can be reproduced in
7.1
channel (or
6.1
channel). Furthermore,
existing stereo recorded content can also be
reproduced
in
7.1 channel (or
6.1
channel).
• Dolby Surround (Dolby Pro
Logic)
Audio processing technology developed by
Dolby Laboratories, Inc. Center and mono
surround information
is
matrixed into two
stereo channels. When reproduced, audio
is
decoded and output in 4 channel surround
sound. This
is
the most common audio
processing method for DVD-video.
• DTS 96/24
A high sound quality digital signal format.
It
records audio at a sampling frequency and bit
rate
of
96kHz124bit which
is
the highest
possible for DVD-video. The number
of
playback channels varies depending on the
software.
• DTS Digital Surround
Digital audio encoding/decoding technology
for theaters developed by DTS, Inc.
It
compresses audio less than Dolby Digital,
delivering a higher quality sound
reproduction.
• DTS-ES
Format for
6.1
channel playback with
surround back information. There are two
modes, "Discrete 6.1" which records all
channels independently, and "Matrix 6.1"
which matrixes surround backchannel into
LS
(left surround) and
RS
(right surround)
channels.
It
is
ideal for playback
of
motion
picture soundtracks.
9a
us
• DTS Neo:6
This technology converts 2 channel stereo
recorded audio for
6.1
channel playback.
There are two modes to select according
to
the
playback source
or
your preference, CINEMA
for movies, and MUSIC for stereo sources
such as music.
• HDMI (High-Definition
Multimedia Interface)
HDMI (High-Definition Multimedia
Interface) is an interface that supports both
video and audio on a single digital connection,
allowing you to enjoy high quality digital
picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital
Contents Protection), a copy protection
technology that incorporates coding
technology for digital video signals.
• PCM (Pulse Code Modulation)
A method
of
converting analog audio to digital
audio for easy enjoyment
of
digital sound.
• S-AIR (Sony Audio Interactive
Radio frequency)
Recent times have seen the rapid spread
of
DVD media, Digital Broadcasting, and other
high quality media.
To ensure that the subtle nuances
of
these high
quality media are transmitted with no
deterioration, Sony has developed a
technology called "S-AIR" for the radio
transmission
of
digital audio signals with no
compression, and has incorporated this
technology into the EZWRTlO/EZW-TIOO.
This technology transfers digital audio signals
with no compression using the 2.4 GHz band
range
of
ISM band (Industrial, Scientific, and
Medical band), such as wireless LANs and
Bluetooth applications.
To Next Page
Loading...
