9
STR-K760P
SECTION 2
TEST MODE
FACTORY PRESET MODE
• All preset contents are reset to the default setting.
• Procedure:
While depressing the MAIN MENU and the PRESET TUNING−
buttons simultaneously, press the
?/1
button again. The message
“FACTORY” appears and the present contents are reset to the
default values.
AM CHANNEL STEP 9 KHz/10 KHz
SELECTION MODE
• Either the 9 KHz step or 10 KHz step can be selected for the AM
channel step.
• Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing the TUNING+ button or the
PRESET TUNING + button, press the
?/1
button to turn on
the main power. Either the message “9 k STEP” or “10 k STEP”
appears. Select the desired step.
FLUORESCENT INDICATOR TUBE TEST MODE
• All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
• Procedure:
While depressing the MOVIE and the > buttons simultaneously,
press the
?/1
button to turn on the main power.
1. All segments turn on.
2CH , A. F. D. , MOVIE and MUSIC LED turn on.
2. Press the VIDEO 1 button, confirm display.
A.F.D. and MUSIC LED turn on.
3. Press the VIDEO 1 button, confirm display
2CH and MOVIE LED turn on.
4. Press the VIDEO 1 button, All segments and all LEDS turn off.
5. Every pressing of the VIDEO 1 button turns on each segment
and LED one after another in the same order.
SOUND FIELD CLEAR MODE
• The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
C
SL SR
SBL SBR
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D
D
D
D
kHz
mft.
MHz
MEMORY
DIRECT
L
SW
CR
SL S SR
SBL SB SBR
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D
D
D
D
dB
kHz
mft.
MHz
MEMORY
DIRECT
L
SW
R
S
SB
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D
D
D
D
dB
kHz
mft.
MHz
MEMORY
DIRECT
• Procedure:
While depressing the 2CH button, press the
?/1
button to turn
on the main power.
The message “SF. CLR.” appears and initialization is performed.
SOFTWARE VERSION DISPLAY MODE
• The software version is displayed.
• Procedure:
While depressing the FM MODE and the DISPLAY buttons
simultaneously, press the
?/1
button to turn on the main power.
The model name, destination and the software version are
displayed.
KEY CHECK MODE
• Button check
• Procedure:
While depressing the A.F.D. and the TUNER FM/AM buttons
simultaneously, press the power
?/1
button to turn on the main
power.
“REST 25” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
COMMAND MODE SELECTION MODE
• The command mode (AV1 or AV2) of the remote commander can
be selected.
• Procedure:
1. While depressing the ENTER button, press the ?/1 button
to turn on the main power.
2. The message “C.MODE.AV 1” or “C.MODE.AV 2” appears
for a moment. Select the desired mode.
To Next Page
Loading...
