10
Receiver Operations
Using the remote Z
The remote lets you operate the receiver and the Sony
components that are connected to it.
SYSTEM
STANDBY
SYSTEM
CONTROL/
FUNCTION
TV CONTROL
SYSTEM
STANDBY
21 3
BASS
BOOST
TV/
VIDEO
MASTER
VOL
1/u
VISUAL
CONTROL
TV
54 6
87 9
0
SHIFT ENTER
RMS/START
SYSTEM CONTROL / FUNCTION
TVVIDEO TAPE/MD
(AUTO CATEGORIZE SYSTEM)
5.1 INPUT
– / – –
TUNERCD
>
10
PHONO
MODE MUTINGON/OFF
SURROUND
TEST
TONE
EFFECT/
DELAY
CENTERREAR
++
–
+
–
–
SWAPPOSITION DISC
RMS
CLEARDIRECTION
–
SUB CH
+
+=
CH/
PRESET
)0
(9p
P IN P JUMP
ANT
TV/VTR
P
D. SKIP
r
LEVEL
1 Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The receiver and the selected component turn on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To play Press
VHS video tapes (VTR-3 mode) VIDEO
TV programs TV
Audio tapes or MiniDiscs (MD) TAPE/MD
Compact Discs (CD) CD
Radio programs TUNER
Note
The PHONO button on the remote does not operate.
If you want to change the factory setting of a
button
See “Changing the factory setting of a SYSTEM
CONTROL/FUNCTION button” on this page.
If the component does not turn on
Press the power switch on the component.
2 Start playing.
See “Remote Button Descriptions” on page 22 for
details.
To turn off the components
Press SYSTEM STANDBY. This will also turn off the
video/audio component connected to AC OUTLET on
the back of the receiver at the same time.
z If you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on when you press VIDEO and switch to the
appropriate video input. If the TV does not switch to
the appropriate input automatically, press TV/VIDEO
on the remote.
z Watching TV without the receiver (for Sony TVs only)
Press TV CONTROL to set the remote to operate TV
functions only. When you press this button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to the TV input, press TV/
VIDEO.
Changing the factory setting of a SYSTEM
CONTROL/FUNCTION button Z
If the factory settings of the SYSTEM CONTROL/
FUNCTION buttons don’t match your system
components, you can change them. For example, if
you have two CD players and you don’t have a tape
deck or an MD deck, you can assign the TAPE/MD
button to your second CD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
SYSTEM
CONTROL/
FUNCTION
SYSTEM
STANDBY
21 3
BASS
BOOST
TV/
VIDEO
MASTER
VOL
1/u
VISUAL
CONTROL
TV
54 6
87 9
0
SHIFT ENTER
RMS/START
SYSTEM CONTROL / FUNCTION
TVVIDEO TAPE/MD
(AUTO CATEGORIZE SYSTEM)
5.1 INPUT
– / – –
TUNERCD
>
10
PHONO
MODE MUTINGON/OFF
SURROUND
TEST
TONE
EFFECT/
DELAY
CENTERREAR
++
–
+
–
–
SWAPPOSITION DISC
RMS
CLEARDIRECTION
–
SUB CH
+
+=
CH/
PRESET
)0
(9p
P IN P JUMP
ANT
TV/VTR
P
D. SKIP
r
LEVEL
1 Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change
(TAPE/MD, for example).
Numeric
and ENTER
buttons
To Next Page
Loading...
