22
Additional Information
Remote
Button
Operates Function Remote
Button
Operates Function
0-9, >10 Receiver Selects preset numbers
CH/PRESET
+/–
CD player/MD
deck
Selects track numbers.
0 selects track 10.
TV/VCR Selects channel numbers
Receiver Scans and selects preset
stations
Selects preset channelsTV/VCR
CD player
0/)
=/+
CD player
Skips discs (CD player with
multi-disc changer only)
Searches tracks (forward or
backward)
Tape deck/MD
deck/VCR
Changes channels/discs
when used with 0-9
TV/VCR/DBS
tuner/CD
player
ENTER
Turns on or off the powerTV/VCR/DBS
tuner
VISUAL 1/u
TV CONTROL TV Turns on the TV, switches
the input to “TV,” and sets
the remote to operate the TV
Changes the position of the
small picture
*
TVPOSITION
Swaps the small and the
large picture
*
TVSWAP
Activates the picture-in-
picture function
*
TVP IN P
Jumps back and forth
between the previous and
current channels
TVJUMP
Selects output signal from
the antenna terminal: TV
signal or VCR program
VCRANT TV/VTR
Normally, adjusts the
master volume of the
receiver.
If TV CONTROL was
pressed, it adjusts the
volume on the TV.
TVMASTER VOL
+/–
Normally, mutes the sound
from the receiver.
If TV CONTROL was
pressed, the sound on the
TV itself is muted.
TVMUTING
Not applicable—5.1 INPUT
* Only for Sony TVs with the picture-in-picture function
Selects discs (CD player
with multi-disc changer
only)
CD player/
MD deck
Fast forwards or rewinds
P CD player/
Tape deck/
MD deck/
VCR
Skips tracks
(
p
CD player/
Tape deck/MD
deck/VCR
Pauses play or record (also
starts recording with
components in record
standby)
CD player/
Tape deck/MD
deck/VCR
9
Starts play
r
Tape deck
Stops play
Tape deck
Starts play on the reverse
side
Tape deck/MD
deck/VCR
Sets tape deck to the record
standby mode
CD playerDISC
D. SKIP
Starts recording when
pressed with ( (or 9 on
tape deck)
r + (
Remote Button Descriptions
Refer to the table below for an explanation of remote buttons not described on previous pages or for remote buttons
without a corresponding button on the main unit.
–/– – —
Not applicable
Note
The PHONO button on the remote does not operate.
To Next Page
Loading...
